banner

Chimney Repair Draper UT

This page provides relevant content and local businesses that can help with your search for information on Chimney Repair. You will find informative articles about Chimney Repair, including "Chimney Questions and Answers". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Draper, UT that can help answer your questions about Chimney Repair.

Granite Transformations
8018564335
615W 9400 South
Sandy, UT

Data Provided By:
Trestlewood
8013752779
P.O. Box 1050
Pleasant Grove, UT

Data Provided By:
Sid Walch
All Point Inspection Inc.
801-598-6167
PO Box 830
Sandy, UT
 
Chris Hunt
CR Hunt Construction
8012300030
PO Box 1766
West Jordan, UT
 
Patrick Jones
Mountainview Construction & Remodeling, Inc.
(801) 891-3314
P.O. Box 65405
Salt Lake City, UT
 
Home Depot
(801) 254-5762
3852 W 13400 S
Riverton, UT
 
SolarTek Solutions
8774151786
299 S Main St
Salt Lake City, UT

Data Provided By:
Chris Hunt
CR Hunt Construction
8012300030
4689 Helenic Lane
West Jordan, UT
 
David Sykes
David Sykes Mural Arts
801-577-2466
6491 Rogue River Ln
West Valley City, UT
 
Vantreese
Able Demolition and Salvage Corp.
801-520-3248
2997 So. 300 W.
Salt Lake City, UT
 
Data Provided By:

Chimney Questions and Answers

Building a cricket (or saddle) on a chimney

When building a cricket on a chimney, do the edges of the cricket go all the way to the edge of the chimney or are they set back from the edge to allow for flashing? If set back, how far?

The cricket may be built either way I run mine out to the edge of the chimney to ensure that when the flashing is added the water is run well away. You should remember to maintain your 1" clearance from combustible material for fire protection. The flashing will serve as the fire stop. Masonry Chimney repairs

The chimney on my 30 year old house has crumbling mortar on the top 6 rows.  It appears to be stable from this point down.  What type of mortar can I use to repair this?  Are there any hints I can get? Can I just run up with a trowel, straight edge and some mortar?  Are the liner bricks likely to need remortaring?

What usually happens is the mortar will breakdown from where the chimney leaves the attic. This is caused by the temperature difference creating moisture and chemical breakdown from the burned fuel. I recommend taking the chimney down to the flashing and replacing it inside and out. You can use either a type S mortar (1 part portland 1/2 part lime 4 1/2 sand)or a type N ( 1 part portland 1 part lime 6 parts sand). You can buy this in bags by type and just add sand. Check the rest of the chimney for cracks inside and out but it will most likely be just the top and should be simple to replace.

 

Chimney chipping

My Chimney is being chipped away little by little in various spots, it seems as if the outside face of the red brick is just being shaved off by the elements of weather. How can I re-patch the faces of these bricks around the chimney, and with what? it almost looks as if birds are pecking at different bricks along the top and base of chimney.

Your right the brick are ...

Click here to read the rest of this article from Handyman