Electricians Bozeman MT

This page provides useful content and local businesses that can help with your search for Electricians. You will find helpful, informative articles about Electricians, including "Wiring a 3-way or 4-way switch". You will also find local businesses that provide the products or services that you are looking for. Please scroll down to find the local resources in Bozeman, MT that will answer all of your questions about Electricians.

Service Electric
(406) 587-5516
39 North Rouse Avenue
Bozeman, MT
Sundance Electric Inc
(406) 582-0258
1000 Laurel Ranch Road
Bozeman, MT
Tryon Gjersing Electric
(406) 586-5895
1511 Bohart Lane
Bozeman, MT
Tech Electric Inc
(406) 586-8226
1407 Gold Avenue Suite 1
Bozeman, MT
Chinook Electric
(406) 585-8690
10 Brandon Trail Road
Bozeman, MT
Rocky Mountain Contractors Inc
(406) 586-0078
508 East Cottonwood Street
Bozeman, MT
Matzinger Electric
(406) 587-7290
907 Bridger Drive
Bozeman, MT
Garcia Albert & Janice
(406) 585-8690
10 Brandon Trail Road
Bozeman, MT
Egbert Electric & Plumbing
(406) 587-4189
2115 Industrial Drive
Bozeman, MT
Quickdraw Electrical
(406) 587-4711
Bozeman, MT

Wiring a 3-way or 4-way switch

Do you need to wire 2 switches to control the same light or lights??

Or, wire 3 switches to control the same light or lights??

Here are the instructions for wiring:

Wiring a 3-Way Switch

To use 2 switches to control the same fixture, you will need to use two 3-way switches.

Run 2-wire cable from the fixture to the first switch. Between the switches you will need to run 3-wire (with ground) cable. (The white and red wires will be the switched wires.)

In the picture below, we show power coming into the light fixture. The black (hot) wire will pass right through going to the first switch. Attach it to the white wire of the wire running to the switch. The white wire from the power source will attach to the light's white wire. The light's black wire should be attached to the black wire running to the first switch.

At the switch the white wire (hot) coming from the light, will be connected to the dark colored screw. Mark it with a black marker or paint the end black to indicate it is hot. The red and white wire of the 3-wire going to the next switch should be attached to the light colored screws. Connect the black wire of the 3 wire cable to the black coming into the switch from the light.

At the second switch, attach the black wire to the dark screw and the white and red to the light colored screws.
3 way switch wiring 3 way elementary
For more elementary wiring diagrams of different 3 way circuits scroll down to the bottom of the page. ...

Click here to read the rest of this article from Handyman