banner

Fencing Contractors Blue Springs MO

This page provides relevant content and local businesses that can help with your search for information on Fencing Contractors. You will find informative articles about Fencing Contractors, including "Outdoors Questions and Answers". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Blue Springs, MO that can help answer your questions about Fencing Contractors.

The Guier Fence Store
(816) 888-2127
2501 Northwest Jefferson Street
Blue Springs, MO

Data Provided By:
M & R Fence
(816) 456-9761
1844 S Norton Ave
Independence, MO

Data Provided By:
Van's Fence
(816) 452-6558
9420 NE Vrooman Dr
Kansas City, MO

Data Provided By:
Pete Rowe
217 West 79th Street
Kansas City, MO

Data Provided By:
Kdg Fence
(636) 456-9302
205 N Hwy 47
Warrenton, MO

Data Provided By:
Diamond Fence
(913) 681-3059
9109 Wenonga Road
Shawnee Mission, KS

Data Provided By:
KW Fencing
(816) 863-6568
5705 Michigan Ave
Kansas City, MO
Hours
Mon 08:00 AM-06:00 PM;Tue 08:00 AM-06:00 PM;Wed 08:00 AM-06:00 PM;Thu 08:00 AM-06:00 PM;Fri 08:00 AM

Data Provided By:
Four Paws Fence, LLC
(866) 663-4162
PO Box 28126
Gladstone, MO

Data Provided By:
Steve's Fence
16103 Lawrence Avenue
Belton, MO

Data Provided By:
Fence Depot
(636) 441-7374
1805 Scherer Parkway
Saint Charles, MO

Data Provided By:
Data Provided By:

Outdoors Questions and Answers



Installing a lattice privacy fence

What is the correct way to build a gate on a privacy fence? I need a gate that will last!

I am assuming you have a railing of some sort next to you neighbor. I would build a 2x4 frame, attach some privacy lattice on the neighbor side then hold it upand anchor it to the railing using clamps or attach to the wall and floor...that part is up to you.You may have to search around for some clamps that will do the job, look in the fencing parts area, automotive etc, to find something that would work. Attaching it to the floor and the wall would be best however to give it the proper stability it needs. IF you cannot build it yourself purchase a pre-built fencing section..that would also work and adhere a 2x4 to the wall side and attach the fencing section to the 2x4 brace. That should be enough to hold it in place with maybe just a wired edge on the other side next to the rail.
BOX like, square it off, attach fencing boards the same as you fence and install the proper fence hardware. They come in kits and often with fencing instructions.

 

Fence

I have a chain link fence installed around my pool area. I would like to replace the fence on one side with a wood privacy fence. My problem is that the area is nothing but concrete. My question is do they make anchors for attaching 4x4 wood posts to concrete without me having to tear up the concrete or can you suggest a way to anchor the post to the concrete. One of my thoughts was to use the existing post for the chain link fence and somehow attaching the wood posts to them. Any suggestions would be greatly appreciated.

They do make what you are looking for. Check out the post fasteners for attaching 4x4's or even 6x6's to a cement post. You will need to drill a hole in the cement and buy the expandable concrete bolts to bolt the fastener down. They work very well for a deck where all the load is vertical, which is NOT the case for a fence. Therefore I would leave the metal posts from the chain link fence in the ground and use those to supply the horizontal support. You can use c-clamps to clamp the post to the fence. Between the two, I believe you will get the sturdiness you are looking for.

 

Pillars with river rock veneer for fencing

I would like to build to pillars detached at my property line to be included in my cedar fence. It would be a standard 6' column ...

Click here to read the rest of this article from Handyman