banner

Fencing Contractors Hopkins MN

This page provides relevant content and local businesses that can help with your search for information on Fencing Contractors. You will find informative articles about Fencing Contractors, including "Outdoors Questions and Answers". Below you will also find local businesses that may provide the products or services you are looking for. Please scroll down to find the local resources in Hopkins, MN that can help answer your questions about Fencing Contractors.

Horse Fence Direct
(763) 502-1895
7268 Commerce Circle East
Minneapolis, MN

Data Provided By:
Hoyt Fencing
(612) 524-4543
6325 38th Ave. North
Crystal, MN

Data Provided By:
Hansen Bros. Fence & Construction Company
(612) 524-4542
1701 James Cir N
Minneapolis, MN

Data Provided By:
Design Fence Company
(612) 852-8644
1188 Dayton Ave
Saint Paul, MN

Data Provided By:
FenceIn Deck, LLC
(866) 427-5938
1009 Felix Street
West Saint Paul, MN

Data Provided By:
Modern Fence
(651) 426-4097
3180 Ryan Ln
Little Canada, MN

Data Provided By:
Landmark Fence & Deck, Inc.
(612) 524-4426
1345 Highway 13
Mendota, MN

Data Provided By:
Rudick Enterprises, Inc.
(612) 852-8449
6427 84th Ct N
Brooklyn Park, MN

Data Provided By:
Artistic Fence
(651) 405-8579
1510 Lone Oak Rd
Eagan, MN

Data Provided By:
The Home Depot
(800) 504-9128
401 2Nd Street South
Waite Park, MN
 
Data Provided By:

Outdoors Questions and Answers



Installing a lattice privacy fence

What is the correct way to build a gate on a privacy fence? I need a gate that will last!

I am assuming you have a railing of some sort next to you neighbor. I would build a 2x4 frame, attach some privacy lattice on the neighbor side then hold it upand anchor it to the railing using clamps or attach to the wall and floor...that part is up to you.You may have to search around for some clamps that will do the job, look in the fencing parts area, automotive etc, to find something that would work. Attaching it to the floor and the wall would be best however to give it the proper stability it needs. IF you cannot build it yourself purchase a pre-built fencing section..that would also work and adhere a 2x4 to the wall side and attach the fencing section to the 2x4 brace. That should be enough to hold it in place with maybe just a wired edge on the other side next to the rail.
BOX like, square it off, attach fencing boards the same as you fence and install the proper fence hardware. They come in kits and often with fencing instructions.

 

Fence

I have a chain link fence installed around my pool area. I would like to replace the fence on one side with a wood privacy fence. My problem is that the area is nothing but concrete. My question is do they make anchors for attaching 4x4 wood posts to concrete without me having to tear up the concrete or can you suggest a way to anchor the post to the concrete. One of my thoughts was to use the existing post for the chain link fence and somehow attaching the wood posts to them. Any suggestions would be greatly appreciated.

They do make what you are looking for. Check out the post fasteners for attaching 4x4's or even 6x6's to a cement post. You will need to drill a hole in the cement and buy the expandable concrete bolts to bolt the fastener down. They work very well for a deck where all the load is vertical, which is NOT the case for a fence. Therefore I would leave the metal posts from the chain link fence in the ground and use those to supply the horizontal support. You can use c-clamps to clamp the post to the fence. Between the two, I believe you will get the sturdiness you are looking for.

 

Pillars with river rock veneer for fencing

I would like to build to pillars detached at my property line to be included in my cedar fence. It would be a standard 6' column ...

Click here to read the rest of this article from Handyman