banner

Grouting Contractors Pearl MS

Looking for Grouting Contractors in Pearl? We have compiled a list of businesses and services around Pearl that should help you with your search. We hope this page helps you find Grouting Contractors in Pearl.

ELLIS MASONRY INC
(601) 932-9600
1165 Weems St
Pearl, MS
 
Ingram Plastering & Co Inc
(601) 366-5045
1322 Simwood Pl
Jackson, MS
 
Nelson Plastering Company
(601) 954-4095
954 Parkwood Pl
Jackson, MS
 
Wardells Masonry
(601) 982-3451
1627 Fairwood Dr
Jackson, MS
 
Southeastern Stone & Flooring
(601) 829-0677
643a Holly Bush Rd
Brandon, MS
 
Gregory Masonry
(601) 400-5455
200 E Capitol St
Jackson, MS
 
Gordon Masonry
(601) 206-1829
407 Briarwood Dr Ste 207b4
Jackson, MS
 
Upton Plastering Company
(601) 981-3097
3014 Forest Avenue Ext
Jackson, MS
 
Moss Larry
(601) 829-3396
120 Gabelwood Trl
Brandon, MS
 
The King Chimney Cleaning
(601) 922-2286
1203 Westhaven Blvd
Jackson, MS
 

HandymanWire -Grout Questions and Answers



How to use a mortar grout bag

I try to lay some paver on my entrance way. And having a big problem on mortar grout bag. No matter what I did(press hard), the mortar seem don't want to come out to fill in the joint. I did put allot of water when mix mortar but still no luck. If you known the trick, please help!!!

There really is no real trick to using a grout bag. Check to make sure that the nozzle is clear or if your bag doesn't have one that you have cut the end of the bag large enough for the grout to pass through. The other thing to remember is don't press the bag twist the top like you are trying to wring it out. Other than that there is not much that can go wrong.

I bought the grout bag from Home Depot, made by plastic with red nose, yes.. it has a little hold with 1/4" diameter. The problem is I used the ready mix mortar also bought from same place for mortar bag, and every time when I try to twist, press.. it doesn't come out and look like all the sand is getting down to the bottom of the bag to block the hold. Can you tell me what part's of the mix technique or the material(mortar and sand) can I use.

Sounds as if the problem is not the bag but the mix. Most spec.mix mortar seems to separate in the bags and if you don't mix hole bags at a time you do not get a good mix. Also and don't ask me why the fine grains of sand always seem to be gone leaving a course and hard to finish mixture. go to your lumber or block yard and buy a bag of Type N or S mortar mix ask them where you can get some plaster sand or you can buy silica sand which is finer yet. Mix the sand and mortar 1 part mortar to 3 parts sand and that should do it.

 

Grouting

I am a ceramic artist. I have made handmade tiles for my kitchen wall and have put them on the wall. The tiles are green/blue with a beige design. I would like to grout the tiles now, but don't want the grout to ...

Click here to read the rest of this article from Handyman