banner

Grouting Contractors West Jordan UT

Looking for Grouting Contractors in West Jordan? We have compiled a list of businesses and services around West Jordan that should help you with your search. We hope this page helps you find Grouting Contractors in West Jordan.

All Rockzz & Stonezz Masonry
(801) 982-7599
6313 S 2700 W
West Jordan, UT
 
Aztec Siding Inc
(801) 280-8652
5493 Telluride Cv
West Jordan, UT
 
Mcqueen Masonry
(801) 282-3331
4014 Nike Dr
West Jordan, UT
 
Oak Park Chimney Corporation
(801) 566-5536
9500 S 500 W Ste 212
Sandy, UT
 
Aztech Stucco Inc
(801) 598-1992
757 New England Dr
Sandy, UT
 
Braithwaite Mike Masonry
(801) 569-1946
2908 Leisure Cir
West Jordan, UT
 
Cannon Masonry
(801) 282-1612
4197 Farm Rd
West Jordan, UT
 
Interpace Brick
(801) 282-6621
8415 S 4300 W
West Jordan, UT
 
Hofheins Robert & Colleen
(801) 576-9105
1127 Hidden Valley Dr
Sandy, UT
 
A Masonry Brick Repairs
(801) 571-9949
1780 Teakwood Dr
Sandy, UT
 

HandymanWire -Grout Questions and Answers



How to use a mortar grout bag

I try to lay some paver on my entrance way. And having a big problem on mortar grout bag. No matter what I did(press hard), the mortar seem don't want to come out to fill in the joint. I did put allot of water when mix mortar but still no luck. If you known the trick, please help!!!

There really is no real trick to using a grout bag. Check to make sure that the nozzle is clear or if your bag doesn't have one that you have cut the end of the bag large enough for the grout to pass through. The other thing to remember is don't press the bag twist the top like you are trying to wring it out. Other than that there is not much that can go wrong.

I bought the grout bag from Home Depot, made by plastic with red nose, yes.. it has a little hold with 1/4" diameter. The problem is I used the ready mix mortar also bought from same place for mortar bag, and every time when I try to twist, press.. it doesn't come out and look like all the sand is getting down to the bottom of the bag to block the hold. Can you tell me what part's of the mix technique or the material(mortar and sand) can I use.

Sounds as if the problem is not the bag but the mix. Most spec.mix mortar seems to separate in the bags and if you don't mix hole bags at a time you do not get a good mix. Also and don't ask me why the fine grains of sand always seem to be gone leaving a course and hard to finish mixture. go to your lumber or block yard and buy a bag of Type N or S mortar mix ask them where you can get some plaster sand or you can buy silica sand which is finer yet. Mix the sand and mortar 1 part mortar to 3 parts sand and that should do it.

 

Grouting

I am a ceramic artist. I have made handmade tiles for my kitchen wall and have put them on the wall. The tiles are green/blue with a beige design. I would like to grout the tiles now, but don't want the grout to ...

Click here to read the rest of this article from Handyman