banner

Vinyl Siding Installation Draper UT

Looking for Vinyl Siding Installation in Draper? We have compiled a list of businesses and services around Draper that should help you with your search. We hope this page helps you find Vinyl Siding Installation in Draper.

Topp Construction
P.O. Box 57191
Muray, UT
Membership Organizations
NAHB Remodelers, National Association of Home Builders, Salt Lake Home Builders Association

Data Provided By:
ICON Remodeling
1448 East 2700 South
Salt Lake City, UT
Service Type
Designer / Architect, Remodeler
Membership Organizations
NAHB - Certified Aging In-Place Specialist, NAHB Certified Graduate Builder, NAHB Certified Graduate Remodeler, National Association of Home Builders, National Association of the Remodeling Industry, National Remodelors Council
Awards
2009 Guildmaster

Data Provided By:
All States Lawn and Landscape
(801) 571-7336
611 West 12300 South
Draper, UT
 
Steve-N-Son Landscaping Inc
(801) 523-8888
11308 South 675 West
Draper, UT
 
RBI Inc
(801) 553-0500
12712 South 125 East
Draper, UT
 
Jackson & LeRoy Remodeling
2464 Arnett Drive
Salt Lake City, UT
Services
Remodeler, Specialty Contractor, Designer / Architect
Membership Organizations
Pella, Qualified Remodeler Top 500, Salt Lake Home Builders Association

Data Provided By:
Miller Landscaping
(801) 571-9256
8048 South 1460 West
West Jordan, UT
 
Concrete Gardens Statuary
(801) 572-5381
84 West 13490 South
Draper, UT
 
Countrywood Nursery
(801) 816-9104
611 West 12300 South
Draper, UT
 
Kimball Property Maintenance
(801) 571-3351
12717 South 125 East
Draper, UT
 
Data Provided By:

HandymanWire - Vinyl Siding Questions and Answers



Installation

Vinyl siding installation

 I want to side my home with vinyl siding, I'm a do-it-yourselfer but this is a pretty big job. Some questions I have, do I remove my existing cedar shake siding or just go over it? How big of a job is it really to do or should I leave it to a pro?

How game are you?? Installing vinyl siding can be a do-it-yourself job. Actually the siding part is relatively easy. The trim work is always the hardest part. If you can find an installer that will work with you, maybe you can do part of the job.

You generally install the siding right over your existing siding.

Look at your neighbor's or friend's house that is vinyl sided, and get an idea of what you need.

The corner pieces, the bottom edge, top edge, and the J channels around the windows and doors etc. Again the hard part will be the trim work. Look at the eaves and the fascia. I usually cover that with aluminum. You can rent a brake and do that part too, if you want to give it a try.

Installation directions

Can anyone direct me to a web site that gives detailed instructions about installing vinyl house siding?

http//www.triangle-lumber.com/news/tips/install-vinyl/

 

Vinyl siding installed over other siding

I have defective hardboard siding which is warped and full of moisture. I'm looking for opinions on whether or not to tear the old siding off of the house or leave it when the vinyl is put on. Also is there a minimum thickness the vinyl should be?

Typically the vinyl is installed right over the existing siding. But that usually is if the present siding is structurally ok. I think you can cover it as long as it is not infested with termites/ants. The vinyl will stop any additional moisture damage.

The thickness is regulated by A.S.T.M D3679 and should be no less than .035 in thickness, premium siding product will measure 40 plus or minus .005.

 

Cutting

Cutting Vinyl Siding?

We want to install a chimney and need to cut the existing vinyl siding in order to attach the two by four for the chimney framing. What is the best way to cut vinyl that is in place already ?

If there is nothing under there that will be affected, set your circular saw for a minimum cut and snap a line and run it up the line.

I have cut it with a utility knife, but I wouldn't try it on that job. The saw will give y...

Click here to read the rest of this article from Handyman