Washing Machines North Pole AK
The Home Depot
601 Johansen Expressway
3115 Airport Way
3215 Industrial Ave
Appliance Repair Fairbanks AK
340 1st Ave
8 am - 6 pm
Kic Tither Unlimited LLC
3000 Peger Rd
425 Merhar Avenue
M-SA 6 am - 10 pm
SU 8 am - 8 pm
418 3rd St
Arrow Appliances & Electronics
700 23rd Ave
I N S E R C O
2017 S Cushman St
Golden North Home Center
PO Box 10267
HandymanWire -Washing Machines Questions and Answers
Painting in a Washing Machine
The paint on the top inside of my washing machine has peeled off leaving just the bare metal. It is causing rustspots on my clothes. How and what product should be used to repaint this surface?
Any metal paint, like Rustoleum or Temclad to help out. They are self priming and self sealing. Read the can for proper directions.Also, you can most likely use pocelain touch up paint. That would also work for you.
Washing Machine Dripping Inside
Well, this is the first time I've seen this. We have a washing machine that seems to work just fine. However, after we got back from a weekend trip, my wife noticed that there was a constant (although slow) dripping off the upper inside lining in the "tub".
Since the actual water hoses feed into the bottom of the washing machine, why is this dripping from the top? Is there a washer that needs replaced somewhere?
Doesn't the water spray down on top of the clothes from above and in the back of the tub?
(it does on ours)
Yes, the shut off valve must be worn, do you have a parts book? Or a handy parts store with one (if you have the make and model number) they should be able to give you the parts you need and some helpful advice too.
Washing Machine Full of Water
HELP! I opened my washing machine today only to find it more than half-filled with water! The machine was off for 2 days since I last did the wash and I don't know what is wrong with it. Is it time to get a new washer? This is a Kenmore. I put it on spin cycle to see if the water would drain out and it didn't, and now I'm afraid to leave home in case the washer overflows when I'm not around.
I had the same problem with my Kenmore a few years ago. I don't know if your problem is the same, but I took out all the water I could and then turned the washer on its side. There were two hoses connected to a plastic pump. When I disconnected the hoses and took of the pump, there was a child's sock stuck inside the pump. I removed the sock and problem solved.
Washing machine Belt Replacement
The belt on my washing machine needs to be replaced. I would like to know if anybody could tell me how to get the new one on. I was looking at it and I am not sure how you get it around all of the pulleys without completely dropping the motor. I have an older Kenmore. Any info. would help.
I replaced the belt on my Kenmore too. It is pretty easy. Just follow instructions that come with new belt.
Washing Machine Leak
Have small puddle of water from under washer, when it's running. How do I remove parts to see where leak is coming from? Whis is a Maytag washer.
If you pull it out from the wall, you should be able to take off the access panel on the back to get a view of underneath.
Whirlpool Washer - leaks, rubber and spin problems
I have a few problems.
1. My washer does not spin or drain when it is more than h...
Click here to read the rest of this article from Handyman