Wood Stove Lebanon OH

Looking for Wood Stove in Lebanon? We have compiled a list of businesses and services around Lebanon that should help you with your search. We hope this page helps you find Wood Stove in Lebanon.

Innatech LLC
(513) 932-5130
315 South West Street
Lebanon, OH

Data Provided By:
Queen City Polymers Inc.
(513) 779-0990
6101 Schumacher Park Drive
West Chester, OH

Data Provided By:
Kramer's Sew & Vac Center
(513) 891-5005
9907 Montgomery Road
Cincinnati, OH

Data Provided By:
Transport Specialists Inc.
(513) 771-2220
12130 Best Place
Cincinnati, OH

Data Provided By:
FlexTech Packaging Ltd.
(513) 874-3600
10095 International Boulevard
Cincinnati, OH

Data Provided By:
KLW Plastics Inc.
(513) 539-2673
980 Deneen Avenue
Monroe, OH

Data Provided By:
Maverick Corporation
(513) 469-9919
11379 Grooms Road
Cincinnati, OH

Data Provided By:
Alliance Calibration
(513) 769-1200
11402 Reading Road
Cincinnati, OH

Data Provided By:
Nu-Tech Polymers Co. Inc.
(513) 942-6003
10087 International Boulevard
Cincinnati, OH

Data Provided By:
Ohio Scale Systems
(513) 874-8686
5142 Duff Drive
Cincinnati, OH

Data Provided By:
Data Provided By:

HandymanWire -Wood Stove Questions and Answers

Woodburning furnace and chimney

My husband and I are planning to install a woodburning furnace and new chimney any suggestions would be helpful. We have a two story home and want to know should the chimney go inside or out. We have never built one so a step by step would be helpful.

I feel that any woodburning chimney should be built inside. This keeps the chimney warmer and slows the build up of creosote in the liner of the chimney. Your local building inspector should have a diagram for the construction of the chimney with all clearances needed.

Wood stoves

I have a pre-fabricated wood burning fireplace. My question is could I get one of those cheaper styles box type wood burning stoves and somehow put it on a piece of sheet metal or the like to prevent the carpet in front of the fireplace and hook up an elbow type of flue to go up and connect to my fireplace chimney flue? Would all work all right as far as drafts,etc.?

Does your chimney/fireplace have good draft now? If so, yes it would probably work. Don't just get any piece of sheetmetal for the floor. Metal conducts heat quite well and offers no protection. (except from spilled ashes perhaps. Check where you buy the stove on requirements.. usually you should put it on brick or stone (this doesn't have to be expensive or fancy) And they do sell heat shields that it can sit on and to protect adjacent walls.

What ever you do, don't scrimp on that protection... More homes burn than you imagine from improper installation or operation of wood stoves.

Also, check on how much your insurance bill will go up and factor that into your savings... it may surprise you.

Is it okay to put vent in ceiling to draw air

We heat with wood and although one room is very warm, the others are not. It seems one problem is that the wood burning draws air in and creates a cold breeze. I am considering putting a vent into the ceiling above the woodstove to provide air for the stove without drawing it from all the windows. The vent would go up into our attic space and it would seem that the drawing of air would make the attic cooler and help stop ice dams. Is my theory okay? Alternatively, would there be more warm air going into the attic than cold air coming down?

Hot air from the woodburner goes up the chimney and will draw colder air into the house from any other source, including windows and vents from the attic... It is for this reason that fireplaces and woodburners often produce a net negative heat effect in a house...In other words, using a fireplace or woodburner can actually cause you to lose 10% more heat than they create because of drawn in colder air. You may help the situation more by sealing or replacing drafty windows, and caulking any air leaks in your home.

Certainly the wood stove is much better than a fireplace, and the main reason is you have better control of how much hot air is going ...

Click here to read the rest of this article from Handyman